FAAC D600 24 V (MPN 110600)

PDFPrintEmail
Automation and Control - Door Operators - FAAC D600 24 V (MPN 110600)
FAAC d600 d1000FAAC d600 d1000
Manufacturer
Voltage
Power
FAAC d1000 Manual
FAAC d600 d1000 Datasheet
Description

FAAC D600 24 V (MPN 110600) garage door operator with Control Board E600.

  • For spring - counterbalanced up-and-over doors and sectional doors - for residential use.
  • The D600 operator is an electromechanical device - with a 24 Vdc motor - that can be used in sectional - spring balanced and - with the correct adaptor - counter-weighted garage doors.
  • The nylon base makes the operator lighter and with better handling when compared to metal.
  • FAAC has developed a patented head-rail connection - the operator can be mounted on the rail support without installation tools - with a simple rotation to engage 4 supports of the plate and a pin to prevent unfastening.
  • Installation time has been reduced by 40% on previous models.
  • The electronic anti-crushing device adjusts itself automatically at set up
  • The operator keeps the tripping threshold constantly at minimum level - and adapts at all times to the differences in force required to move the door.
  • The device stops the door movement as it opens and reverses it at closing
  • To protect the door against mechanical stress as the movement begins - an electronic control gradually increases the speed of the operator (soft start)
  • Deceleration - both at opening and closing cycle of the door (soft stop)
Add Products