Electronic News E 108

Electronic news E 108

• is a harbinger of alarm logic microprocessor extremely compact, flexible and reliable.
• Instrument signal through indicator lights and controls for audible warning of any abnormal state variable process.
• The input signals standard (max 8 points) are NO or NC contacts from sensitive devices such as switches,
  thermostats, level, minimal signal relays, etc..
• Visualization is achieved with 8 dual LED 0.5 "x 0.25" high efficiency.
• For each viewer of the plates can be inserted with an indication of the variable and the type of alarm.
• On the tool are available commands for reset and try replicated in terminal.
• Programming sequence ISA.
• The selection is done via software ISA-A/ISA-F1A: holding down the buttons and ACK TEST
  switch on the instrument, this sequence is programmed on either the ISA or ISA-F1A-A.
• Programming of the inputs. -
• Set the inputs are open or closed in normal absence of alarm and food in the form. 
• Connecting momentarily to enter the SET (5 and 20) the state of the inputs is stored permanently.

• Features:
• Power 115/230 VAC 50/60 Hz
• Power Consumption 6 VA max
• Temperature Operation 0 to +50 ° C
• Storage Temperature -20 To +70 ° C
• Humidity -
• Housing material Retardant ABS resin
• Dimensions 72x144x170 mm to DIN 43700 standards
• Panel Cut 68 x 138 mm
• FPS IP54
• Weight 1kg
• Terminals Removable screw terminals
• Mounting panel with two screw clamps
• CE marking Second EMC EN50081-1, EN50082-2
• Electrical Safety second EN61010-1