FAAC 578 D (MPN 790922)

FAAC 578 D (MPN 790922) Control Board

• Technical Specification
• Power supply V~ (+6% -10%) 230
• Absorbed power (W) 10
• Motor max. load (W) 1000
• Accessories max. load (A) 0,5
• Operating ambient temperature -20 °C +55 °C
• Protection fuses 2
• Function logics: Automatic / “Stepped” automatic / Semi-automatic /
  Safety devices / Semi-automatic B / Dead-man C / “Stepped” semiautomatic
  / Mixed B/C logic
• Work time Programmable (from 0 to 4 min.)
• Pause time Programmable (from 0 to 4 min.)
• Thrust force Adjustable over 50 levels
• Terminal board inputs: Open - Partial Open - Opening safety devices - Closing
  safety devices - Stop - Edge - Power supply+Earth - Opening and closing limitswitches
  - Encoder
• Terminal board outputs: Flashing lamp - Motor - 24 Vdc accessories power
  supply- 24 Vdc indicator-light / Timed output / Electric lock command -
  'traffic lights' - Failsafe
• Rapid connector 5-pin card connection for Minidec, Decoder or RP receivers
• Programming 3 keys (+, -, F) and display, "basic" or "advanced" mode
• Basic mode programmable functions: Function logic - Pause time - Thrust Force
  - Opening-closing direction
• Advanced mode programmable functions: Torque at initial thrust - Braking - Fail
  safe- Pre-flashing - Indicator-light/Timed output/Electric lock or 'traffic lights'
  command -Opening and closing safety devices logic - Encoder/ Anti-crushing
  sensitivity -Decelerations - Partial opening time - Work time - Assistance request
  - Cycle counter