Back to: Bellboxes and Sirens

Paradox SR150

PDFPrintEmail
Security Alarms and Fire Systems - Bellboxes and Sirens - Wireless - Paradox SR150
Paradox SR 150Paradox SR 150
More - Products

Security Alarms and Fire Systems - Bellboxes and Sirens

Manufacturer

Paradox

Frequency
Colors
Ask a question about this product
Paradox SR 150 Interior
Description
Paradox SR150
  • Compatible with MG Series V4.0 and SP series V4.0 when using an RTX3 V1.5
  • Built-in transceiver (433MHz or 868MHz)
  • 100db wireless siren with integrated strobe light
  • Weather-resistant design using a PC/ABS enclosure with UV protection and a silicone coated PCB (-20°C to 50°C / -4°F to 122°F)
  • Battery powered only, no need for AC power
  • Fast alarm response time (4 seconds)
  • 2.5 hour alarm display (strobe flashes every 4 seconds after bell cut-off)
  • Siren presence supervised by control panel
  • Panel presence supervised by siren (activates siren and strobe for 5 minutes if communication is lost -- squawk once and flash every 4 seconds)
  • Triple tamper protection (screw removal, cover removal, and removal from wall)
  • Assign up to 4 sirens per control panel
  • In-field firmware upgradeable via 307USB
  • Siren test mode
  • 4-LED signal strength and status display
  • Strobe lens available in 4 colours (red, blue, amber, and clear)
  • Fully powered using three 1.5Vdc type “D” alkaline batteries (included). Not required, but can also be powered using 8-16Vac / 9-20Vdc power supply.
  • Dimensions: 24cm x 6cm x 18cm (9.5in x 2.3in x 7 in)
Add Products

Edit - Listing ID-151