Paradox REM 3
Security Alarms and Fire Systems - Remote Controls
|Paradox REM 3
Compatible with MG5000, MG5050 and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher)
System Status Memory: The REM3 will keep the last system status received from the control panel in memory.
Momentarily press the Info button to display the last system status--even when out of range.
Used to confirm the last action you did on the system while away from the system.
Built-In Transceiver (433MHz or 868MHz)
Independent Arm, Sleep, Stay and Off buttons and LED display per partition
Control up to 6 PGMs and/or generate panics
Keypad Mode: Requires code entry
Remote Mode: One-touch arming / Disarming
Installer Diagnostic Mode:
Partition 1 LEDs = Signal Strength Display
Partition 2 LEDs = RF Interference Display
Press the Status button to receive system status
Label to identify remote control owner
Compact, water-resistant design
Size: 8cm x 3.4cm x 1.5cm (3.1in x 1.3in x 0.6in)
Add Products - Promote ad
Edit - Listing ID-146