Paradox PX8

Security Alarms and Fire Systems - Expansion Modules

PX8 Features

Connected to the RTX3 in stand-alone mode, the PX8 communicates the status of up to 8 wireless events, such as zones opening or closing, through its 8 hardwired outputs

You can also set an output to signal a zone tamper, supervision loss or low battery

You can also set an output to activate upon pressing specific buttons on an REM1 or RAC1 remote control

Connect up to four PX8 on a single RTX3

Outputs can follow events or have a delay of 1 to 999 seconds or minutes

Use an RTX3 on-board PGM to supervise the PX8

In-field firmware upgradeable via a 307USB and WinLoad

Program with an Esprit 636 or 646 keypad

Edit add Seller Tooltip